SANDARC INC.Sponsored by: SANDARC
   
Home Directions Accommodations Registration Form Banquet VE Testing on Site
ScheduleExhibitorsSpeakersEventsPrizesCommittee
About San DiegoDeicationLinks

 

Prizes
 

Registration Prize updated

We updated the Registration prize to a newer model radio.

The IC-7100 looks to be a real cool unit! Good reports about this radio.

  
 
 
 
Main Prize
  
 
 
Icom IC-7600 *
 

The Icom IC-7600 provides professional performance in the 160 to 6 meter amateur bands. It utilizes Icom's proven IF-DSP technology and features selectable roofing filters at 3kHz, 6kHz and 15kHz. Like the IC-7700 and IC-7800, the IC-7600 uses dual 32-bit floating-point Texas Instruments DSP chips with one for the radio other for the spectrum scope. 104dB dynamic range and +30dbm 3rd order intercept point is achieved on the HF bands. It utilizes a double superhet with an image-rejection 2nd mixer circuit providing improved in-band IMD. The 5.8 inch (diagonal) color WQVGA display has a quick-start LED backlight and views well from any angle and you can even program your startup screen. Dual frequency watch is available with same band operation. There is even a RTTY and PSK31 encoder/decoder built-in!

The IC-7600 has all the features you would expect are here including PBT, RIT, XIT, keypad, 24 hour clock-timer, 101 memories and multiple scan modes. There is also a built-in voice recorder and voice synthesizer (English/Japanese selectable]. This radio has two USB ports. The front panel USB port is for keyboard or memory drive (not supplied) and one on the rear panel for PC control and audio. This radio has a six transmit meter functions and three meter display modes. Plus a meter output jack on the rear panel. Enjoy great stability with a built-in TCXO providing 0.5ppm (0 - 50°C). There is both a mechanical relay (16V/0.5A) and FET relay (250V/200mA) for keying external amplifier. Separate RX-OUT and RX-IN antenna ports are provided allowing connection of external preselectors, multicouplers etc. There is also a transverter port.

This radio requires 13.8 VDC at 23 amps. The IC-7600 comes with HM-36 hand microphone, OPC-1457 DC power cable, MB-121 carry handle, CW plug and spare fuses.

 
 

Early Bird Registration

Dated before May 31, 2014

  
 
 
FTDX-1200 *
 

The Yaesu FTDX1200 provides sophisticated operation on 160 to 6 meters with up to 100 Watts on SSB, CW, and FM (25 Watts AM carrier) and a rugged state-of-the-art highly balanced receiver circuit configuration for top performance on today’s crowded bands. It uses 32-bit high speed floating point DSP. Yaesu’s acclaimed superior DSP algorithm is highly effective in weak signal processing and enhancement. The 1st IF frequency is protected by selectable 3 kHz, 6 kHz and 15 kHz roofing filters that effectively attenuate interfering signals. The triple conversion circuit structure allows highly flexible gain distribution at each stage. This enables elimination of unwanted signals through filters at each stage as well as optimized gain distribution. A built-in 4.3-in TFT wide full color High Resolution Display with loads of information provides superior operability and visibility for the FTDX1200 owner. A High Speed Spectrum Scope located just below the LCD, displays the information needed to place them at the right place on the band with the right receiver set-up.

Sophisticated optional accessories offer additional features that make the FTDX1200 a true high performance platform for all hams – no matter what mode they chose to operate. The FFT-1 supports advanced functionality, including the AF-FFT Scope, RTTY/PSK31 Encode/Decode, CW Decode and CW Auto Zero-in. The optional SCU-17 USB Interface supports CAT, USB Audio in/out, TX control (PTT, Key, Shift) and firmware update functions.

The FTDX1200 is supplied with MH-31B8 hand mic, DC cord, spare fuses and manual.

 
 

Pre-Registration

June 1 to August 22, 2014

  

Wouxun 8D

Registration

After August 22, 2014
 
 
 
IC-7100 *
  

The Icom IC-7100 is an affordable all-mode HF/VHF/UHF mobile transceiver with a very high Cool Factor. DSP at the IF level is the cornerstone of this impressive new multi-bander. RF power is HF 100 watts, 50 MHz 100 watts, 144 MHz 50 watts and 430 MHz 35 watts. Extended receive provides coverage from 30 kHz to 199.999 MHz and 400-470 MHz. Enjoy ± 0.5ppm frequency stability and 505 memory channels. There is a built in radioteletype decoder. And D-Star is built in! The remote head, with built-in speaker, offers full control of the radio. And the head rear panel features jacks for key, speaker and microphone. This radio requires 13.8 VDC at 22 amps. The rear panel has an antenna input for HF/6M and one for VHF/UHF bands. The IC-7100 includes HM-198 hand mic, DC power cable, OPC-2253 11 foot separation cable, 13 pin acc cable, USB cable, printed Owner's Manual and CD Owner's Manual.

 
 
Banquet
  
    We have two prizes for the Banquet. One is in a wrapped box? And it is a real nice mystery prize. The other is a signed copy right from the author himself, a copy of his book “Ham Radio for Dummies”  
 
DX- Breakfast
  
 
 
 
Heil Pro-Set
 
 

For more information about this prize, please visit Heil Sound

 

  
 
Lunch
  
 
 
 
Wouxun 8D
  
     
 
Speaker Thank You Prize
  
 
 

Wouxun 8D

 

 

* Notice

Four prizes $600.00 and over, winner has to complete this IRS Form W-2G

Revised: 8-30-2014